Zsh Mailing List Archive
Messages sorted by: Reverse Date, Date, Thread, Author

PATCH: completion options update



This is the latest installment of the usual completion options update
based on -h output comparisons.

Relevant versions are:
ansible		2.5.2
cryptsetup	2.0.3
git		2.18rc1
kpartx		0.7.7
lynx		2.8.9dev.19
mpc		0.30
qiv		2.3.2
eu-readelf	0.172
sqlite		3.24.0 - support for sqlite archives
ss		180608
subversion	1.10  - completing shelves
linux mpstat	11.7.3
linux sar	11.7.3
tmux		2.7
tune2fs		1.44.2
linux usermod	4.6
wget		1.19.5
xxd		1.10
which and zed - complete the -x option

For tmux, select-layout apparently now targets panes rather than
windows. I'm not entirely confident in this corresponding change to
_tmux.

Losing the descriptions for ansible plugins makes it a lot faster to do
completion for ansible-doc. This now checks the verbose style to see if
descriptions are wanted.

I wouldn't normally update for a release candidate as with git here but
it appeared on my system with an update.

Oliver

diff --git a/Completion/Linux/Command/_cryptsetup b/Completion/Linux/Command/_cryptsetup
index ea7152ea1..351859586 100644
--- a/Completion/Linux/Command/_cryptsetup
+++ b/Completion/Linux/Command/_cryptsetup
@@ -33,7 +33,7 @@ _arguments -s \
   '(--use-random)--use-urandom[use /dev/urandom to generate volume key]' \
   '--shared[share device with another non-overlapping crypt segment]' \
   '--uuid=[set device UUID]:uuid' \
-  '--allow-discards[allow discards (aka TRIM) requests for device]' \
+  '--allow-discards[allow discard (aka TRIM) requests for device]' \
   '--header=[device or file with separated LUKS header]:file:_files' \
   '--test-passphrase[do not activate device, just check passphrase]' \
   '--tcrypt-hidden[use hidden header (hidden TCRYPT device)]' \
@@ -64,6 +64,7 @@ _arguments -s \
   '--persistent[set activation flags persistent for device]' \
   '--label=[set label for the LUKS2 device]:label' \
   '--subsystem=[set subsystem label for the LUKS2 device]:subsystem' \
+  '--unbound[create unbound (no assigned data segment) LUKS2 keyslot]' \
   '(- : *)--version[show version information]' \
   '(- : *)'{-\?,--help}'[display help information]' \
   '(- : *)--usage[display brief usage]' \
@@ -86,6 +87,7 @@ case $state in
       'luksAddKey:add a new key'
       'luksRemoveKey:remove a key'
       'luksChangeKey:change a key'
+      'luksConvertKey:convert a key to new pbkdf parameters'
       'luksKillSlot:wipe key from slot'
       'luksUUID:print/change device UUID'
       'isLuks:check if device is a LUKS partition'
@@ -112,7 +114,7 @@ case $state in
       erase|convert|config|repair|(luks(AddKey|Erase|RemoveKey|DelKey|UUID|Dump)|isLuks))
 	args=( $device )
       ;;
-      luks(Format|AddKey|RemoveKey|ChangeKey))
+      luks(Format|AddKey|RemoveKey|ChangeKey|ConvertKey))
 	args=( $device ':key file:_files' )
       ;;
       luksHeader*) args=( $device '--header-backup-file:file:_files' );;
diff --git a/Completion/Linux/Command/_kpartx b/Completion/Linux/Command/_kpartx
index 11c614c01..8f09c416d 100644
--- a/Completion/Linux/Command/_kpartx
+++ b/Completion/Linux/Command/_kpartx
@@ -1,6 +1,6 @@
 #compdef kpartx
 
-_arguments -s -w : \
+_arguments -s -S : \
   '-a[add partition mappings]' \
   '-r[read-only partition mappings]' \
   '-d[delete partition mappings]' \
@@ -9,6 +9,6 @@ _arguments -s -w : \
   '-p[set device name-partition number delimiter]' \
   '-f[force creation of mappings]' \
   '-g[force GUID partition table]' \
-  '-v[Operate verbosely]' \
-  '-s[don'\''t return until the partitions are created]' \
+  '-v[operate verbosely]' \
+  '-n[return before the partitions are created]' '!(-n)-s' \
   '1: : _files'
diff --git a/Completion/Linux/Command/_ss b/Completion/Linux/Command/_ss
index dff289947..b1bfa207c 100644
--- a/Completion/Linux/Command/_ss
+++ b/Completion/Linux/Command/_ss
@@ -18,6 +18,7 @@ _arguments -C -s \
   "($info -m --memory)"{-m,--memory}'[show socket memory usage]' \
   "($info -p --processes)"{-p,--processes}'[show process using each socket]' \
   "($info -i --info)"{-i,--info}'[show internal TCP information]' \
+  "($info)--tipcinfo[show internal tipc socket information]" \
   "($info -s --summary)"{-s,--summary}'[print summary statistics]' \
   "($info -b --bpf)"{-b,--bpf}'[show bpf filter socket information]' \
   "($info -E --events)"{-E,--events}'[continually display sockets as they are destroyed]' \
@@ -33,13 +34,14 @@ _arguments -C -s \
   "($info -d --dccp)"{-d,--dccp}'[display DCCP sockets]' \
   "($info -w --raw)"{-w,--raw}'[display RAW sockets]' \
   "($info -x --unix)"{-x,--unix}'[display Unix domain sockets]' \
+  "($info)--tipc[display only TIPC sockets]" \
   "($info)--vsock[display only vsock sockets]" \
-  "($info -f --family)"{-f,--family}'[display sockets of specified type]:family:(unix inet inet6 link netlink unix vsock)' \
+  "($info -f --family)"{-f+,--family=}'[display sockets of specified type]:family:(unix inet inet6 link netlink unix vsock tipc)' \
   "($info -K --kill)"{-K,--kill}'[forcibly close sockets, display what was closed]' \
   "($info -H --no-header)"{-H,--no-header}'[suppress header line]' \
-  "($info -A --query --socket)"{-A,--query,--socket}'[specify socket tables to show]: :_values -s , socket\ table all inet tcp udp raw unix packet netlink unix_dgram unix_stream unix_seqpacket packet_raw packet_dgram vsock_stream vsock_dgram' \
-  "($info -D)"{-D,--diag=}'[dump raw info to file]:file:_files' \
-  "($info -F)"{-F,--filter=}'[read filter information from a file]:file:_files' \
+  "($info -A --query --socket)"{-A+,--query=,--socket=}'[specify socket tables to show]: :_values -s , socket\ table all inet tcp udp raw unix packet netlink unix_dgram unix_stream unix_seqpacket packet_raw packet_dgram vsock_stream vsock_dgram tipc' \
+  "($info -D)"{-D+,--diag=}'[dump raw info to file]:file:_files' \
+  "($info -F)"{-F+,--filter=}'[read filter information from a file]:file:_files' \
   "($info)*: :->filter" && ret=0
 
 if [[ -n $state ]]; then
diff --git a/Completion/Linux/Command/_sysstat b/Completion/Linux/Command/_sysstat
index 855bf0a70..8b7929ddd 100644
--- a/Completion/Linux/Command/_sysstat
+++ b/Completion/Linux/Command/_sysstat
@@ -9,7 +9,7 @@ _mpstat() {
     '(-A)-N[specify NUMA nodes]:NUMA node' \
     '(-A)-n[report summary CPU statistics based on NUMA node placement]' \
     '-o[display statistics in JSON]:format:(JSON)' \
-    '(-A)-P[specify processor number]:processor: _values -s "," processor ON ALL {0..$(_call_program processors getconf _NPROCESSORS_ONLN)}' \
+    '(-A)-P[specify processor number]:processor: _values -s "," processor ALL {0..$(_call_program processors getconf _NPROCESSORS_ONLN)}' \
     '-u[report CPU utilization]' \
     '(- 1 2)-V[display version information]' \
     '1: : _guard "^-*" interval' \
@@ -85,29 +85,31 @@ _sar() {
     '-F[display statistics for mounted filesystems]' \
     '-f[extract records from file]:record:_files' \
     '-H[report hugepages utilization]' \
-    '-h[display help]' \
+    '(--human -p)-h[make output easier to read: implies --human and -p]' \
+    '(- 1 2)--help[display usage information]' \
     '--human[print sizes in human readable format]' \
     '*-I[report statistics for interrupts]:interrupts: _values -s "," interrupts 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SUM ALL XALL' \
     '-i[select records as close as possible to interval]:interval' \
     '-j[display persistent device names]:type:(ID LABEL PATH UUID)' \
     '-m[report power management statistics]:keywords: _values -s "," keywords CPU FAN FREQ IN TEMP USB ALL' \
-    '-n[report network statistics]:keywords: _values -s "," keywords DEV EDEV NFS NFSD SOCK IP EIP ICMP EICMP TCP ETCP UDP SOCK6 IP6 EIP6 ICMP6 EICMP6 UDP6 ALL' \
+    '-n[report network statistics]:keywords: _values -s "," keywords DEV EDEV NFS NFSD SOCK IP EIP ICMP EICMP TCP ETCP UDP SOCK6 IP6 EIP6 ICMP6 EICMP6 UDP6 FC SOFT ALL' \
     '-o[save readings to file in binary form]:file:_files' \
     '-P[report per-processor statistics]:processor: _values -s "," processors ALL' \
     '-p[pretty-print device names]' \
     '-q[report queue length and load averages]' \
     '-R[report memory statistics]' \
-    '-r[report memory utilization statistics]' \
+    '-r[report memory utilization statistics]:: :(ALL)' \
     '-S[report swap space utilization]' \
     '-s[set starting time of report]:start time (HH\:MM\:SS)' \
     '--sadc[print name of data collector]' \
     '-t[display timestamps in original local time of file creator]' \
-    '-u[report CPU utilization]: :(ALL)' \
+    '-u[report CPU utilization]:: :(ALL)' \
     '(- 1 2)-V[display version information]' \
     '-v[report status of kernel tables]' \
     '-W[report swapping statistics]' \
     '-w[report task creation and system switching activity]' \
     '-y[report TTY device activity]' \
+    '-z[omit output for any devices lacking activity during sample period]' \
     '1: : _guard "^-*" interval' \
     '2: : _guard "^-*" count'
 }
diff --git a/Completion/Linux/Command/_tune2fs b/Completion/Linux/Command/_tune2fs
index af120e279..3d64f266c 100644
--- a/Completion/Linux/Command/_tune2fs
+++ b/Completion/Linux/Command/_tune2fs
@@ -24,7 +24,7 @@ _arguments -s -S \
   '-m+[set the percentage of reserved filesystem blocks]:percentage' \
   '-M+[set the last-mounted directory for the filesystem]:directory:_files -/' \
   '-o+[mount options]:options:_values -s , debug bsdgroups user_xattr acl uid16 journal_data journal_data_ordered journal_data_writeback nobarrier block_validity discard nodelalloc' \
-  '-O+[set or clear filesystem features]: :_values -s , feature dir_index dir_nlink encrypt extentextent extra_isize filetype flex_bg has_journalhuge_file large_file metadata_csum mmp project quota read-only resize_inode sparse_super uninit_bg' \
+  '-O+[set or clear filesystem features]: :_values -s , feature 64bit dir_index dir_nlink ea_inode encrypt extent extra_isize filetype flex_bg has_journal large_dir huge_file large_file metadata_csum metadata_csum_seed mmp project quota read-only resize_inode sparse_super uninit_bg' \
   '-r+[set the number of reserved filesystem blocks]:number' \
   '-Q+[set quota feature on the superblock]: :_values -s , "quota option" usrquota grpquota prjquota' \
   '-s+[set sparse super feature]:state:((0\:off 1\:on))' \
diff --git a/Completion/Unix/Command/_ansible b/Completion/Unix/Command/_ansible
index f05dac8a6..330ef66b7 100644
--- a/Completion/Unix/Command/_ansible
+++ b/Completion/Unix/Command/_ansible
@@ -30,7 +30,7 @@ case $service in
       '(-D --diff)'{-D,--diff}'[show differences when changing small files and templates]'
       '(-b --become)'{-b,--become}'[escalate privileges on remote system]'
       '(-f --forks)'{-f+,--forks=}'[specify number of parallel processes to use]:processes [5]'
-      '--become-method=[specify privilege escalation method to use]:method [sudo]:(sudo su pbrun pfexec doas dzdo ksu runas pmrun)'
+      '--become-method=[specify privilege escalation method to use]:method [sudo]:(sesu sudo su pbrun pfexec doas dzdo ksu runas pmrun enable)'
       '--become-user=[specify remote user for running operations]:user:_users'
       "--syntax-check[perform a syntax check on the playbook, but don't execute it]"
       '!(-R --su-user -U --sudo-user)'{-R,-U,--su-user,--sudo-user}':user [root]:_users'
@@ -39,17 +39,20 @@ case $service in
   ansible|ansible-console|ansible-inventory|ansible-playbook|ansible-pull|ansible-vault)
     args+=(
       '--ask-vault-pass[ask for vault password]'
-      '--new-vault-id=[specify new vault identity to use for rekey]:vault id'
-      '--new-vault-password-file=[specify new vault password file to use for rekey]:file:_files'
       '--vault-id=[specify vault identity to use]:vault identity'
       '--vault-password-file=[specify vault password file]:vault password file:_files'
     )
   ;|
   ansible|ansible-console|ansible-inventory|ansible-playbook|ansible-pull)
     args+=(
-      '--list-hosts[output list of matching hosts]'
-      '(-i --inventory)'{-i+,--inventory=}'[specify inventory host file]:inventory file:_files'
+      '(-i --inventory)'{-i+,--inventory=}'[specify inventory host file or host list]: : _alternative "files\:inventory file\:_files"
+	"hosts\:host\: _sequence _hosts"'
       '!(-i --inventory)--inventory-file=:inventory file:_files'
+    )
+  ;|
+  ansible|ansible-console|ansible-playbook|ansible-pull)
+    args+=(
+      '--list-hosts[output list of matching hosts]'
       '(-l --limit)'{-l+,--limit=}'[further limit hosts to an additional pattern]:host subset:->hosts'
     )
   ;|
@@ -58,21 +61,22 @@ case $service in
       '(-e --extra-vars)'{-e+,--extra-vars=}'[set additional variables]:key=value or YAML/JSON'
     )
   ;|
+  ansible|ansible-console|ansible-inventory)
+    args+=(
+      '--playbook-dir=[specify substitute playbook directory]:directory:_directories'
+    )
+  ;|
   ansible-playbook|ansible-pull)
     args+=(
       '(-t --tags)'{-t,--tags}'[only run plays and tasks tagged with these values]'
       "--skip-tags[only run plays and tasks whose tags don't match]"
     )
   ;|
-  ansible|ansible-pull)
-    args+=(
-      '(-m --module-name)'{-m+,--module-name=}'[specify module]:module:->plugins'
-    )
-  ;|
   ansible)
     args+=(
       '(-a --args)'{-a+,--args=}'[specify command or module arguments]:arguments:->args'
       '(-B --background)'{-B+,--background=}'[run asynchronously, failing after specified time]:fail timeout (seconds)'
+      '(-m --module-name)'{-m+,--module-name=}'[specify module]:module:->plugins'
       '(-o --one-line)'{-o,--one-line}'[condense output]'
       '(-P --poll)'{-P+,--poll=}'[specify the poll interval if using -B]:interval (seconds) [15]'
       '(-t --tree)'{-t+,--tree=}'[specify directory for log output]:directory:_directories'
@@ -98,14 +102,16 @@ case $service in
   ;;
   ansible-doc)
     args+=(
-      '(-l --list)'{-l,--list}'[list available plugins]'
-      '(-s --snippet)'{-s,--snippet}'[show playbook snippet for specified plugins]'
+      '(-l --list -F --list_files -s --snippet)'{-l,--list}'[list available plugins]'
+      '(-l --list -F --list_files -s --snippet)'{-F,--list_files}'[show plugin names and their source files without summaries]'
+      '(-l --list -F --list_files -s --snippet)'{-s,--snippet}'[show playbook snippet for specified plugins]'
       '(-t --type)'{-t+,--type=}'[choose plugin type]:plugin type [module]:(cache callback connection inventory lookup module strategy vars)'
       '*:plugin:->plugins'
     )
   ;;
   ansible-inventory)
     args+=(
+      '--export[when doing an --list, represent in a way that is optimized for export]'
       '(-y --yaml)--graph[output inventory graph]'
       '--host[output specific host information]'
       '--list[output all hosts information]'
@@ -125,7 +131,7 @@ case $service in
   ;;
   ansible-playbook)
     args+=(
-      '--flush-cache[clear the fact cache]'
+      '--flush-cache[clear the fact cache for every host in inventory]'
       '--force-handlers[run handlers even if a task fails]'
       '--list-tags[list all available tags]'
       '--list-tasks[list all tasks that would be executed]'
@@ -139,6 +145,7 @@ case $service in
       "--check[don't make any changes]"
       '(-d --directory)'{-d+,--directory=}'[specify directory to checkout repository to]:directory:_directories'
       '--full[do a full instead of a shallow clone]'
+      '(-m --module-name)'{-m+,--module-name=}'[specify repository module used for checking out repository]:module:(git subversion hg bzr)'
       '--accept-host-key[adds the hostkey for the repo url if not already added]'
       '--purge[purge checkout after playbook run]'
       '(-f --force)'{-f,--force}'[run the playbook even if the repository could not be updated]'
@@ -153,6 +160,8 @@ case $service in
   ;;
   ansible-vault)
     args=( -A "-*" $args
+      '--new-vault-id=[specify new vault identity to use for rekey]:vault id'
+      '--new-vault-password-file=[specify new vault password file to use for rekey]:file:_files'
       '*::args:->vault'
     )
   ;;
@@ -200,9 +209,15 @@ case $state in
   plugins)
     plugvar=_ansible_${plug}_plugins
     typeset -ga ${plug}
-    (( ${(P)#plugvar} )) || set -A ${plugvar} \
-        ${${(f)"$(_call_program plugins ansible-doc -t $plug -l)"}/ ##/:}
-    _describe -t plugins "${plug} plugin" $plugvar && ret=0
+    if zstyle -T ":completion:${curcontext}:plugins" verbose; then
+      (( ${(P)#plugvar} )) || set -A ${plugvar} \
+	  ${${(f)"$(_call_program plugins ansible-doc -t $plug -l)"}/ ##/:}
+      _describe -t plugins "${plug} plugin" $plugvar && ret=0
+    else
+      (( ${(P)#plugvar} )) || set -A ${plugvar} \
+	  ${${(f)"$(_call_program plugins ansible-doc -t $plug -F)"}%% *}
+      _wanted plugins expl "${plug} plugin" compadd -a $plugvar && ret=0
+    fi
   ;;
   galaxy)
     curcontext="${curcontext%:*}-${line[1]}:"
@@ -265,6 +280,11 @@ case $state in
     curcontext="${curcontext%:*}-${line[1]}:"
     args=()
     case $line[1] in
+      encrypt*|edit|rekey)
+	args+=(
+	  '--encrypt-vault-id=[specify vault id to use to encrypt (required if more than one vault-id is provided)]:vault id'
+	)
+      ;|
       (de|en)crypt*) args=( '--output=[specify output file name]:file:_files' ) ;|
       encrypt_string)
 	args+=(
diff --git a/Completion/Unix/Command/_git b/Completion/Unix/Command/_git
index b92a320df..38b872ea0 100644
--- a/Completion/Unix/Command/_git
+++ b/Completion/Unix/Command/_git
@@ -871,6 +871,7 @@ _git-fetch () {
     '(-n --no-tags -t --tags)'{-n,--no-tags}'[disable automatic tag following]' \
     '(--all -m --multiple)'{-m,--multiple}'[fetch from multiple remotes]' \
     '(-P --prune-tags)'{-P,--prune-tags}'[prune local tags no longer on remote and clobber changed tags]' \
+    \*{-o+,--server-option=}'[send specified string to the server when using protocol version 2]:option' \
     '--filter=[object filtering]:filter:_git_rev-list_filters' \
     '*:: :->repository-or-group-or-refspec' && ret=0
 
@@ -959,9 +960,10 @@ _git-gc () {
   _arguments -S -s \
     '--aggressive[more aggressively optimize]' \
     '--auto[check whether housekeeping is required]' \
-    '(        --no-prune)--prune=[prune loose objects older than given date]: :__git_datetimes' \
+    '(        --no-prune)--prune=-[prune loose objects older than given date]::date [2 weeks ago]:__git_datetimes' \
     '(--prune           )--no-prune[do not prune any loose objects]' \
-    '(-q --quiet)'{-q,--quiet}'[suppress progress reporting]'
+    '(-q --quiet)'{-q,--quiet}'[suppress progress reporting]' \
+    '--keep-largest-pack[repack all other packs except the largest pack]' \
 }
 
 (( $+functions[_git-grep] )) ||
@@ -1768,7 +1770,10 @@ _git-status () {
     '--ignored=-[show ignored files as well]:mode [traditional]:(traditional matching no)' \
     '(-z --null --column --no-column)'{-z,--null}'[use NUL termination on output]' \
     '(--no-column -z --null)--column=-[display in columns]::column.status option:((always\:"always show in columns" never\:"never show in columns" auto\:"show in columns if the output is to the terminal" column\:"fill columns before rows (default)" row\:"fill rows before columns" plain\:"show in one column" dense\:"make unequal size columns to utilize more space" nodense\:"make equal size columns"))' \
-    '(--column)--no-column[do not display in columns]' \
+    "(--column)--no-column[don't display in columns]" \
+    "(--no-renames -M --find-renames)--no-renames[don't detect renames]" \
+    '(--no-renames -M --find-renames)-M[detect renames]' \
+    '(--no-renames -M --find-renames)--find-renames=-[detect renames, optionally set similarity index]::similarity' \
     '*: :__git_ignore_line_inside_arguments _files'
 }
 
@@ -2155,16 +2160,18 @@ _git-config () {
     '(--global --system         -f --file --blob)--local[use local config file]' \
     '(--global --system --local           --blob)'{-f+,--file=}'[use given config file]:config file:_files' \
     '(--global --system --local -f --file)--blob=[read config from given blob object]:blob:__git_blobs' \
-    '(       --int --bool-or-int --path --expiry-date)--bool[setting is a boolean]' \
-    '(--bool       --bool-or-int --path --expiry-date)--int[setting is an integer]' \
-    '(--bool --int               --path --expiry-date)--bool-or-int[setting is an integer]' \
-    '(--bool --int --bool-or-int        --expiry-date)--path[setting is a path]' \
-    '(--bool --int --bool-or-int --path              )--expiry-date[setting is an expiry date]' \
+    '(-t --type --bool --int --bool-or-int --path --expiry-date)'{-t+,--type=}'[ensure that incoming and outgoing values are canonicalize-able as the given type]:type:(bool int bool-or-int path expiry-date color)' \
+    '(-t --type --int --bool-or-int --path --expiry-date)--bool[setting is a boolean]' \
+    '(-t --type --bool --bool-or-int --path --expiry-date)--int[setting is an integer]' \
+    '(-t --type --bool --int --path --expiry-date)--bool-or-int[setting is an integer]' \
+    '(-t --type --bool --int --bool-or-int --expiry-date)--path[setting is a path]' \
+    '(-t --type --bool --int --bool-or-int --path)--expiry-date[setting is an expiry date]' \
     '(-z --null)'{-z,--null}'[end values with NUL and newline between key and value]' \
     '(--get --get-all --get-urlmatch --replace-all --add --unset --unset-all --rename-section --remove-section -e --edit --get-color --get-colorbool)--name-only[show variable names only]' \
     '(--includes)'--no-includes"[don't respect \"include.*\" directives]" \
     '(--no-includes)'--includes'[respect "include.*" directives in config files when looking up values]' \
     '(--global --system --local -f --file --blob --get-urlmatch --replace-all --add --unset --unset-all --rename-section --remove-section -e --edit --get-color --get-colorbool)--show-origin[show origin of config]' \
+    '(2 --add -e --edit -l --list --name-only --rename-section --remove-section --replace-all --unset --unset-all)--default=[with --get, use specified default value when entry is missing]:default' \
     $name_arg \
     $value_arg \
     '::value regex' \
@@ -3708,11 +3715,17 @@ _git-replace () {
     '(: * --raw -f --force)'{-l,--list}'[list replace refs]:pattern' \
     {-d,--delete}'[delete existing replace refs]:*:replacement:__git_objects' \
     '(* 2 --format)'{-e,--edit}'[edit existing object and replace it with the new one]' \
-    '(--raw --format)'{-g,--graft}'[rewrite the parents of a commit]'
+    '(--raw --format)'{-g,--graft}'[rewrite the parents of a commit]' \
+    '--convert-graft-file[convert existing graft file]'
 }
 
 # Ancillary Commands (Interrogators)
 
+(( $+functions[_git-annotate] )) ||
+_git-annotate() {
+  _git-blame "$@"
+}
+
 (( $+functions[_git-blame] )) ||
 _git-blame () {
   local curcontext=$curcontext state line ret=1
@@ -3744,6 +3757,8 @@ _git-blame () {
     '(-n --show-number)'{-n,--show-number}'[show the line number in the original commit]' \
     '-s[suppress author name and timestamp]' \
     '-w[ignore whitespace when finding lines]' \
+    '(--color-by-age)--color-lines[color redundant metadata from previous line differently]' \
+    '(--color-lines)--color-by-age[color lines by age]' \
     '--indent-heuristic[use indent-based heuristic to improve diffs]' \
     $revision_options \
     ':: :__git_revisions' \
@@ -3831,10 +3846,11 @@ _git-get-tar-commit-id () {
 _git-help () {
   _arguments -S -s \
     '(         -g --guides -i --info -m --man -w --web)'{-a,--all}'[show all available commands]' \
-    '(-a --all -g --guides           -m --man -w --web)'{-i,--info}'[show all available commands]' \
-    '(-a --all -g --guides -i --info          -w --web)'{-m,--man}'[show all available commands]' \
-    '(-a --all -g --guides -i --info -m --man         )'{-w,--web}'[show all available commands]' \
+    '(-a --all -g --guides           -m --man -w --web)'{-i,--info}'[display manual for the command in info format]' \
+    '(-a --all -g --guides -i --info          -w --web)'{-m,--man}'[display manual for the command in man format]' \
+    '(-a --all -g --guides -i --info -m --man         )'{-w,--web}'[display manual for the command in HTML format]' \
     '(-g --guides)'{-g,--guides}'[prints a list of useful guides on the standard output]' \
+    '(-v --verbose)'{-v,--verbose}'[print command descriptions]' \
     ': : _alternative commands:command:_git_commands "guides:git guides:(attributes glossary ignore modules revisions tutorial workflows)"'
 }
 
@@ -4703,6 +4719,7 @@ _git-pack-objects () {
     $thin_opt \
     '--shallow[create packs suitable for shallow fetches]' \
     '--honor-pack-keep[ignore objects in local pack with .keep file]' \
+    '--keep-pack=[ignore named pack]:pack' \
     '--compression=-[specify compression level]: :__git_compression_levels' \
     '--keep-true-parents[pack parents hidden by grafts]' \
     '--use-bitmap-index[use a bitmap index if available to speed up counting objects]' \
@@ -5037,7 +5054,9 @@ _git-ls-remote () {
     "--refs[don't show peeled tags]" \
     '--exit-code[exit with status 2 when no matching refs are found in the remote repository]' \
     '--get-url[expand the URL of the given repository taking into account any "url.<base>.insteadOf" config setting]' \
+    '*--sort=[specify field name to sort on]:field:__git_ref_sort_keys' \
     '--symref[show underlying ref in addition to the object pointed by it]' \
+    \*{-o+,--server-option=}'[send specified string to the server when using protocol version 2]:option' \
     ': :__git_any_repositories' \
     '*: :__git_references'
 }
@@ -6407,7 +6426,7 @@ __git_heads () {
 
 (( $+functions[__git_heads_local] )) ||
 __git_heads_local () {
-  local gitdir
+  local f gitdir
   declare -a heads
 
   heads=(${(f)"$(_call_program headrefs git for-each-ref --format='"%(refname:short)"' refs/heads 2>/dev/null)"})
@@ -7742,8 +7761,8 @@ _git() {
       '(: -)--man-path[print the manpath for the man pages for this version of Git and exit]' \
       '(: -)--info-path[print the path where the info files are installed and exit]' \
       '(: -)--html-path[display path to HTML documentation and exit]' \
-      '(-p --paginate)'{-p,--paginate}'[pipe output into $PAGER]' \
-      '--no-pager[do not pipe git output into a pager]' \
+      '(-p --paginate -P --no-pager)'{-p,--paginate}'[pipe output into a pager]' \
+      '(-p --paginate -P --no-pager)'{-P,--no-pager}"[don't pipe git output into a pager]" \
       '--git-dir=-[path to repository]: :_directories' \
       '--work-tree=-[path to working tree]: :_directories' \
       '--namespace=-[set the Git namespace]: :_directories' \
diff --git a/Completion/Unix/Command/_lynx b/Completion/Unix/Command/_lynx
index 6c4d57f6f..d25b03975 100644
--- a/Completion/Unix/Command/_lynx
+++ b/Completion/Unix/Command/_lynx
@@ -1,7 +1,5 @@
 #compdef lynx
 
-# Lynx Version 2.8.7rel.1 (05 Jul 2009)
-
 local curcontext="$curcontext" state line ret=1
 typeset -A opt_args
 
@@ -26,7 +24,9 @@ _arguments -C \
   '-cmd_log=[log keystroke commands to the given file]:keystroke log:_files' \
   '-cmd_script=[read keystroke commands from the given file (see -cmd_log)]:keystroke log:_files' \
   '-color[forces color mode on, if available]' \
-  '-connect_timeout=[set the N-second connection timeout (18000)]:connection timeout (seconds):' \
+  '-collapse_br_tags[toggle collapsing of BR tags (on)]' \
+  '-connect_timeout=[set the N-second connection timeout]:connection timeout (seconds) [18000]' \
+  '-convert_to=[convert input]:format:_mime_types' \
   '-cookie_file=[specifies a file to use to read cookies]:cookie file:_files' \
   '-cookie_save_file=[specifies a file to use to store cookies]:cookie file:_files' \
   '-cookies[toggles handling of Set-Cookie headers (on)]' \
@@ -34,7 +34,8 @@ _arguments -C \
   '-crawl[with -traversal, output each page to a file with -dump, format output as with -traversal, but to stdout]' \
   '-curses_pads[uses curses pad feature to support left/right shifting (on)]' \
   '-debug_partial[incremental display stages with MessageSecs delay (off)]' \
-  '-delay=[set NNN-second delay at statusline message (0.000)]:delay (seconds):' \
+  '-default_colors[use terminal default foreground/background colors (on)]' \
+  '-delay=[set NNN-second delay at statusline message]:delay (seconds) [0.000]' \
   "-display=[set the display variable for X exec'ed programs]:display:_x_display" \
   '-display_charset=[charset for the terminal output]:character set:' \
   "-dont_wrap_pre[inhibit wrapping of text in <pre> when -dump'ing and -crawl'ing, mark wrapped lines in interactive session (off)]" \
@@ -47,7 +48,7 @@ _arguments -C \
   '-fileversions[include all versions of files in local VMS directory listings]' \
   '-force_empty_hrefless_a[force HREF-less 'A' elements to be empty (close them as soon as they are seen) (off)]' \
   '-force_html[forces the first document to be interpreted as HTML (off)]' \
-  '-force_secure[toggles forms-based vs old-style options menu (on)]' \
+  '-force_secure[toggle forcing of the secure flag for SSL cookies (off)]' \
   '-forms_options[toggles forms-based vs old-style options menu (on)]' \
   '-from[toggle transmission of From headers (on)]' \
   '-ftp[disable ftp access (off)]' \
@@ -57,11 +58,13 @@ _arguments -C \
   '-hiddenlinks=[hidden links: options are merge, listonly, or ignore]:option:(merge listonly ignore)' \
   "-historical[toggles use of '>' or '-->' as terminator for comments (off)]" \
   '-homepage=[set homepage separate from start page]:URL:->html' \
+  '-html5_charsets[toggle use of HTML5 charset replacements]' \
   '-image_links[toggles inclusion of links for all images (off)]' \
   '-index=[set the default index file to URL]:URL:->html' \
   '-ismap[toggles inclusion of ISMAP links when client-side MAPs are present (off)]' \
   '-justify[do justification of text (off)]' \
   '-link=[starting count for lnk#.dat files produced by -crawl (0)]:starting count:' \
+  '-list_inline[with -dump, show links inline with text]' \
   '-listonly[with -dump, forces it to show only the list of links (off)]' \
   '-localhost[disable URLs that point to remote hosts (off)]' \
   '-locexec[enable local program execution from local files only (if lynx was compiled with local execution enabled)]' \
@@ -91,6 +94,7 @@ _arguments -C \
   '-nostatus[disable the miscellaneous information messages (off)]' \
   '-notitle[disable the title at the top of each page (off)]' \
   '-nounderline[disable underline video-attribute]' \
+  "-nozap=[disable checks for the 'z' key]:duration:(all initially full)" \
   '-number_fields[force numbering of links as well as form input fields (off)]' \
   '-number_links[force numbering of links (off)]' \
   '-partial[toggles display partial pages while downloading (on)]' \
@@ -105,7 +109,7 @@ _arguments -C \
   '-pseudo_inlines[toggles pseudo-ALTs for inlines with no ALT string (on)]' \
   '-raw[toggles default setting of 8-bit character translations or CJK mode for the startup character set (off)]' \
   '-realm[restricts access to URLs in the starting realm (off)]' \
-  '-read_timeout=[set the N-second read-timeout (18000)]:timeout (seconds):' \
+  '-read_timeout=[set the N-second read-timeout]:timeout (seconds) [18000]' \
   '-reload[flushes the cache on a proxy server (only the first document affected) (off)]' \
   '-restrictions=[use -restrictions to see list]:options:->restrictions' \
   '-resubmit_posts[toggles forced resubmissions (no-cache) of forms with method POST when the documents they returned are sought with the PREV_DOC command or from the History List (off)]' \
@@ -113,6 +117,9 @@ _arguments -C \
   '-scrollbar[toggles showing scrollbar (off)]' \
   '-scrollbar_arrow[toggles showing arrows at ends of the scrollbar (on)]' \
   '-selective[require .www_browsable files to browse directories]' \
+  '-session=[resume from specified file on startup and save session to it on exit]:session file:_files' \
+  '-sessionin=[resume session from specified file on startup]:session file:_files' \
+  '-sessionout=[save session to specified file on exit]:session file:_files' \
   '-short_url[enables examination of beginning and end of long URL in status line (off)]' \
   "-show_cfg[show 'LYNX.CFG' setting (off)]" \
   '-show_cursor[toggles hiding of the cursor in the lower right corner (on)]' \
@@ -131,16 +138,18 @@ _arguments -C \
   '-trace[turns on Lynx trace mode (off)]' \
   '-trace_mask=[customize Lynx trace mode]:trace mask:(0 1 2 3 4 5 6 7)' \
   '-traversal[traverse all http links derived from startfile]' \
+  '-trim_blank_lines[toggle trimming of leading/trailing/collapsed-br blank lines (on)]' \
   '-trim_input_fields[trim input text/textarea fields in forms (off)]' \
   '-underline_links[toggles use of underline/bold attribute for links (off)]' \
   '-underscore[toggles use of _underline_ format in dumps (off)]' \
+  '-unique_urls[toggle use of unique-urls setting for -dump and -listonly options (off)]' \
   '-use_mouse[turn on mouse support (off)]' \
   '-useragent=[set alternate Lynx User-Agent header]:user-agent header:' \
   '-validate[accept only http URLs (meant for validation) implies more restrictions than -anonymous, but goto is allowed for http and https (off)]' \
   '-verbose[toggles [LINK\], [IMAGE\] and [INLINE\] comments with filenames of these images (on)]' \
   '(- *)-version[print Lynx version information]' \
   '-vikeys[enable vi-like key movement (off)]' \
-  '-width=[screen width for formatting of dumps (default is 80)]:number of columns:' \
+  '-width=[specify screen width for formatting of dumps]:number of columns [80]' \
   '-with_backspaces[emit backspaces in output if -dumping or -crawling]' \
   '-xhtml-parsing[enable XHTML 1.0 parsing (off)]' \
   ':URL:->html' && ret=0
@@ -148,12 +157,12 @@ _arguments -C \
 case "$state" in
 restrictions)
   _values -s ',' 'restriction' \
-    \? all bookmark bookmark_exec change_exec_perms chdir default \
-    dired_support disk_save dotfiles download editor exec exec_frozen \
+    \? all bookmark bookmark_exec change_exec_perms chdir compileopts_info \
+    default dired_support disk_save dotfiles download editor exec exec_frozen \
     externals file_url goto inside_ftp inside_news inside_rlogin \
-    inside_telnet jump lynx_cgi mail multibook news_post options_save \
-    outside_ftp outside_news outside_rlogin outside_telnet print shell \
-    suspend telnet_port useragent && return
+    inside_telnet jump lynxcfg_info lynxcfg_xinfo lynxcgi mail multibook \
+    news_post options_save outside_ftp outside_news outside_rlogin \
+    outside_telnet print shell suspend telnet_port useragent && return
   ;;
 html)
   _alternative 'files:file:_files -g "*.x#html#(-.)"' 'urls:URL:_urls' && return
diff --git a/Completion/Unix/Command/_mpc b/Completion/Unix/Command/_mpc
index 45d93550d..4f200c69e 100644
--- a/Completion/Unix/Command/_mpc
+++ b/Completion/Unix/Command/_mpc
@@ -37,6 +37,7 @@ _mpc_command() {
     disable:"disable an output"
     enable:"enable an output"
     toggleoutput:"toggle an output"
+    outputset:"set output attributes"
     idle:"wait until an event occurs"
     idleloop:"loop waiting for events"
     insert:"insert a song after the currently playing song in the playlist"
@@ -73,6 +74,7 @@ _mpc_command() {
     stop:"stop the currently playing playlists"
     toggle:"toggles Play/Pause, plays if stopped"
     update:"scan music directory for updates"
+    rescan:"rescan music directory (including unchanged files)"
     version:"report version of MPD"
     volume:"set volume"
     status:"display MPD status"
@@ -222,6 +224,16 @@ _mpc_toggleoutput() {
   _mpc_helper_outputs
 }
 
+_mpc_outputset() {
+  if (( CURRENT == 2 )); then
+    _mpc_helper_outputs
+  else
+    _values -w -S = attribute \
+      'dop:setting:(1 0)' \
+      'allowed_formats:formats'
+  fi
+}
+
 _mpc_move() {
   if (( $#words <= 3 )); then
     _mpc_helper_songnumbers
@@ -318,6 +330,10 @@ _mpc_update() {
   _mpc_helper_files
 }
 
+_mpc_rescan() {
+  _mpc_helper_files
+}
+
 if [[ $service = *MPD_HOST* ]]; then
   _hosts
   return
@@ -339,7 +355,7 @@ if [[ $state = formats ]]; then
   compset -P '([^%]|%[^%]#%)#'
   _wanted metadata expl 'metadata delimiter' compadd -p % -S % \
     artist album albumartist comment composer date disc genre performer title \
-    track time file position mtime mdate && ret=0
+    track time file position id prio mtime mdate && ret=0
 fi
 
 return ret
diff --git a/Completion/Unix/Command/_readelf b/Completion/Unix/Command/_readelf
index 282431462..ce78baf27 100644
--- a/Completion/Unix/Command/_readelf
+++ b/Completion/Unix/Command/_readelf
@@ -7,6 +7,7 @@ _pick_variant -r variant elftoolchain=elftoolchain elfutils=elfutils binutils --
 
 args=(
   '(-a --all)'{-a,--all}'[show all tables]'
+  '(-g --section-groups)'{-g,--section-groups}'[show section groups]'
   '(-h --file-header)'{-h,--file-header}'[show file header]'
   '(-l --program-headers --segments)'{-l,--program-headers,--segments}'[show program headers]'
   '(-S --section-headers --sections)'{-S,--section-headers,--sections}'[show sections header]'
@@ -31,7 +32,6 @@ args=(
 case $variant in
   elftoolchain|binutils)
     args+=(
-      '(-g --section-groups)'{-g,--section-groups}'[show section groups]'
       '(-t --section-details)'{-t,--section-details}'[show section details]'
       '(-e --headers)'{-e,--headers}'[show file, program and sections headers]'
       '(-s --syms --symbols)'{-s,--syms,--symbols}'[show symbol table]'
@@ -49,6 +49,7 @@ case $variant in
   ;;
   elfutils)
     args+=(
+      '--dwarf-skeleton=[find skeleton compile units (with -w)]:file:_files'
       '--elf-section[used specified section as ELF input data]::section'
       '(-e --exception)'{-e,--exception}'[show sections for exception handling]'
       '(-N --numeric-addresses)'{-N,--numeric-addresses}"[don't find symbol names for addresses in DWARF data]"
diff --git a/Completion/Unix/Command/_sqlite b/Completion/Unix/Command/_sqlite
index 58f7a9116..4604fb40c 100644
--- a/Completion/Unix/Command/_sqlite
+++ b/Completion/Unix/Command/_sqlite
@@ -1,6 +1,6 @@
 #compdef sqlite sqlite3
 
-local ret opt display_opt sqlite3
+local opt display_opt sqlite3 ign
 local -a options output_modes exclusive dashes
 
 [[ $service = sqlite3 ]] && sqlite3=true || unset sqlite3
@@ -31,16 +31,18 @@ for display_opt in $output_modes ; do
   options+=( "($exclusive)"$^dashes"-${opt}[set output mode to $display_opt]" )
 done
 
+(( $#words == 2 )) || ign='!'
 options+=(
   $^dashes'-separator[set output field separator]:output field separator [|]'
   $^dashes'-nullvalue[set text string for null values]:string'
-  '(- :)'$^dashes'-version[show SQLite version]'
-  '(- :)'$^dashes'-help[show help]'
+  "$ign(- :)"$^dashes'-version[show SQLite version]'
+  "$ign(- :)"$^dashes'-help[show help]'
   '1:SQLite database file:_files'
-  '(- :)2:SQL to run'
+  '(- :)2: :_guard "^-*" "SQL to run"'
 )
 
 (( $+sqlite3 )) && options+=(
+  $^dashes'-A+[run .archive with arguments and exit]'
   $^dashes'-append[append the database to the end of the file]'
   $^dashes'-bail[stop after hitting an error]'
   $^dashes'-cmd[run specified command before reading stdin]:sqlite meta-command'
@@ -53,6 +55,23 @@ options+=(
   $^dashes'-readonly[open the database read-only]'
   $^dashes'-stats[print memory stats before each finalize]'
   $^dashes'-vfs[use specified default VFS]:vfs:(unix-dotfile unix-excl unix-none unix-namedsem)'
+  $^dashes'-zip[open the file as a ZIP Archive]'
 )
 
+if [[ -n $words[(r)-A*] ]]; then
+  options=( -s -w : '(-A --A)'${^dashes}-A "(-f --file -a --append)"${(M)options:#1:*}
+    '(-v --verbose)'{-v,--verbose}'[print each filename as it is processed]'
+    '(1 -a --append -f --file)'{-f+,--file=}'[specify archive file]:archive file:_files'
+    '(1 -a --append -f --file)'{-a,--append=}'[operate on specified file opened using the apndvfs VFS]:archive file:_files'
+    '(-C --directory)'{-C+,--directory=}'[change to specified directory to read/extract files]:directory:_directories'
+    '(-n --dryrun)'{-n,--dryrun}'[show the SQL that would have occurred]'
+    '*:file:_files'
+    + '(commands)' \
+    '(-c --create)'{-c,--create}'[create a new archive]'
+    '(-u --update)'{-u,--update}'[update or add files to an existing archive]'
+    '(-t --list)'{-t,--list}'[list contents of archive]'
+    '(-x --extract)'{-x,--extract}'[extract files from archive]'
+  )
+fi
+
 _arguments $options
diff --git a/Completion/Unix/Command/_subversion b/Completion/Unix/Command/_subversion
index b7e10c06b..e16be7e59 100644
--- a/Completion/Unix/Command/_subversion
+++ b/Completion/Unix/Command/_subversion
@@ -26,7 +26,7 @@ _svn () {
 
   _arguments -C -A "-*" \
     '(-)--help[print help information]' \
-    '(- *)--version[print client version information]' \
+    '(*)--version[print client version information]' \
     '1: :->cmds' \
     '*:: :->args' && ret=0
 
@@ -169,6 +169,9 @@ _svn () {
               '*:file:_files -g "(.svn|*)(/e:_svn_deletedfiles:,e:_svn_status:)"'
             )
           ;;
+	  (unshelve)
+	    args+=( '1:shelf name:compadd - ${${(f)"$(_call_program shelves svn unshelve -q --list)"}%%      *}' )
+	  ;;
           (*)
             case $usage in
               *(SRC|DST|TARGET|URL*PATH)*)
diff --git a/Completion/Unix/Command/_tmux b/Completion/Unix/Command/_tmux
index f7b1bbb20..ac459f8ab 100644
--- a/Completion/Unix/Command/_tmux
+++ b/Completion/Unix/Command/_tmux
@@ -234,6 +234,7 @@ _tmux-choose-client() {
 _tmux-choose-tree() {
   [[ -n ${tmux_describe} ]] && print "put a window into tree choice mode" && return
   _arguments -s \
+    '-G[include all sessions in any session groups in the tree rather than only the first]' \
     '-N[start without the preview]' \
     '-F+[specify format for each list item]:format:__tmux-formats' \
     '-f+[filter items]:filter format:__tmux-formats' \
@@ -561,6 +562,8 @@ _tmux-paste-buffer() {
 _tmux-pipe-pane() {
   [[ -n ${tmux_describe} ]] && print "pipe output from a pane to a shell command" && return
   _arguments -s -A "-*" -S \
+    '-I[write stdout from command to the pane as if it were typed]' \
+    '-O[pipe output from the pane to the command (default unless -I used)]' \
     '-o[only open a pipe if none is currently opened]' \
     '-t+[specify target pane]:pane:__tmux-panes' \
     ':shell command:_cmdstring'
@@ -657,12 +660,13 @@ _tmux-save-buffer() {
 }
 
 _tmux-select-layout() {
-  [[ -n ${tmux_describe} ]] && print "choose a layout for a window" && return
+  [[ -n ${tmux_describe} ]] && print "choose a layout for a pane" && return
   _arguments -s -A "-*" -S \
+    '-E[spread the current pane and any panes next to it out evenly]' \
     '-n[behave like next-layout]' \
     '-o[revert to previous layout]' \
     '-p[behave like previous-layout]' \
-    '-t+[specify a target window]:target window:__tmux-windows' \
+    '-t+[specify a target pane]:target pane:__tmux-panes' \
     ':layout:(even-horizontal even-vertical main-horizontal main-vertical tiled)'
 }
 
diff --git a/Completion/Unix/Command/_user_admin b/Completion/Unix/Command/_user_admin
index 7eeec7e9b..fe28c13f5 100644
--- a/Completion/Unix/Command/_user_admin
+++ b/Completion/Unix/Command/_user_admin
@@ -150,6 +150,7 @@ case ${service%???}:${(M)service%???}:$OSTYPE in
   *:*:linux*)
     args+=(
       '(-R --root)'{-R,--root=}'[specify directory to chroot into]:directory:_directories'
+      '(-P --prefix)'{-P,--prefix=}"[specify root directory to apply changes in but don't chroot]:directory:_directories"
       '(-D -U -L -p --password)'{-p+,--password=}'[specify encrypted password]:encrypted password'
       '(-)'{-h,--help}'[display help information]'
     )
diff --git a/Completion/Unix/Command/_wget b/Completion/Unix/Command/_wget
index 1a7e2d0a3..2a4e722d8 100644
--- a/Completion/Unix/Command/_wget
+++ b/Completion/Unix/Command/_wget
@@ -22,6 +22,7 @@ _arguments -C -s \
   '(--config)--no-config' '--rejected-log=:file:_files' \
   '(--tries -t)'{--tries=,-t+}'[set number of retries]:number of retries' \
   '--retry-connrefused[retry even if connection is refused]' \
+  '--retry-on-http-error=[specify list of HTTP errors to retry]:http error' \
   '(--output-document -O)'{--output-document=,-O+}'[specify file to write documents to]:output file:_files' \
   '(--continue -c)'{--continue,-c}'[continue getting an existing file]'  \
   '--start-pos=:offset' '--show-progress' \
@@ -38,8 +39,7 @@ _arguments -C -s \
   '(--wait -w)'{--wait=,-w+}'[specify wait between retrievals]:time (seconds)' \
   '(--random-wait)--waitretry=:time (seconds)' \
   '(--waitretry)--random-wait[random wait time between retrievals]' \
-  '(--proxy -Y --no-proxy)'{--proxy=,-Y+}'[explicitly turn on proxy]' \
-  '(--proxy -Y --no-proxy)--no-proxy[explicitly turn off proxy]' \
+  '--no-proxy[explicitly turn off proxy]' \
   '(--quota -Q)'{--quota=,-Q+}'[set retrieval quota]:number' \
   '--bind-address=[specify address to bind to (hostname or IP)]:bind address:_bind_addresses' \
   '--limit-rate=[specify limit to download rate]:download rate limit' \
@@ -48,7 +48,7 @@ _arguments -C -s \
   '--ignore-case[ignore case when matching files/directories]' \
   '(-4 --inet4-only -6 --inet6-only)'{-4,--inet4-only}'[connect only to IPv4 addresses]' \
   '(-4 --inet4-only -6 --inet6-only)'{-6,--inet6-only}'[connect only to IPv6 addresses]' \
-  '--prefer-family[connect first to addresses of specified family]:address family:(IPv6 IPv4 none)' \
+  '--prefer-family=[connect first to addresses of specified family]:address family:(IPv6 IPv4 none)' \
   '(--http-user --ftp-user)--user[set both ftp and http user]:user' \
   '(--http-password --ftp-password)--password[set both ftp and http password]:password' \
   '(--password --http-password --ftp-password)--ask-password:[prompt for passwords]' \
@@ -67,7 +67,7 @@ _arguments -C -s \
   '(--user)--http-user=:user' \
   '(--password --ask-password)--http-password=:password' \
   '--no-cache[disallow server-cached data]' \
-  '--default-page=[specify default page name, normally index.html]' \
+  '--default-page=[specify default page name, normally index.html]:default page [index.html]' \
   '(--adjust-extension -E)'{--adjust-extension,-E}'[save all HTML/CSS documents with proper extensions]' \
   "--ignore-length[ignore \`Content-Length' header field]" \
   '*--header=[send a custom HTTP header]:header:->header' \
@@ -93,7 +93,7 @@ _arguments -C -s \
   "--auth-no-challenge[send basic HTTP authentication without first waiting for server's challenge]" \
   '--secure-protocol=[choose secure protocol]:protocol:(SSLv2 SSLv3 TLSv1 TLSv1_1 TLSv1_2 PFS)' \
   --https-only \
-  "--no-check-certificate=[don't check the server certificate]" \
+  "--no-check-certificate[don't check the server certificate]" \
   '--certificate=[specify client certificate]:client certificate file:_files' \
   '--certificate-type=[specify client certificate type]:certificate type:(PEM DER)' \
   '--private-key=[specify private key file]:key file:_files' \
@@ -104,6 +104,7 @@ _arguments -C -s \
   '--pinnedpubkey=:file:_files' \
   '--random-file[specify file with random data for seeding generator]:file:_files' \
   '--egd-file=[specify filename of EGD socket]:file:_files' \
+  '--ciphers=[set the priority string (GnuTLS) or cipher list string (OpenSSL) directly]:string' \
   '--no-hsts[disable HSTS]' \
   '--hsts-file[specify path of HSTS database]:file:_files' \
   '(--user)--ftp-user=:user' \
diff --git a/Completion/Unix/Command/_xxd b/Completion/Unix/Command/_xxd
index 1b1613a64..0034be519 100644
--- a/Completion/Unix/Command/_xxd
+++ b/Completion/Unix/Command/_xxd
@@ -26,7 +26,7 @@ arguments=(
   '(         -E -EBCDIC -i -include -p -postscript -plain -ps -r -revert              )'{-E,-EBCDIC}'[print human-readable part in EBCDIC rather than ASCII]'
   '(-i -include -p -postscript -plain -ps -r -revert)'{-e,-endian}'[little-endian dump]'
   '(-b -bits -E -EBCDIC -i -include -p -postscript -plain -ps -r -revert              )'{-i,-include}'[output in C include file style]'
-  '(-b -bits -E -EBCDIC -i -include -p -postscript -plain -ps                         )'{-p,-postscript,-plain,-ps}'[read or write a plain hexdump (no line numbers or ASCII rendering)]'
+  '(-b -bits -E -EBCDIC -i -include -p -postscript -plain -ps -C -capitalize          )'{-p,-postscript,-plain,-ps}'[read or write a plain hexdump (no line numbers or ASCII rendering)]'
 
   '(-b -bits -E -EBCDIC -i -include                           -r -revert -u -uppercase)'{-r,-revert}'[reverse mode\: read a hex dump and output binary data]'
   '(-b -bits                                                  -r -revert -u -uppercase)'{-u,-uppercase}'[output upper-case hex digits]'
@@ -34,7 +34,7 @@ arguments=(
   '(- :)'{-h,-help}'[display usage message]'
   '(- :)'{-v,-version}'[show program version]'
   '*'{-a,-autoskip}"[a single '*' replaces runs of NUL (toggleable)]"
-
+  '(-C -capitalize)'{-C,-capitalize}'[capitalize variable names in C include file style]'
   {-c+,-cols}'[specify number of octets per line]: :_guard "[0-9a-fA-Fx]#" "number of octets per line"'
   {-g+,-groupsize}'[specify the number of octets per group]: :_guard "[0-9]#" "number of octets per group"'
   {-l+,-len}'[specify number of octets to output]: :_guard "[0-9]#" "number of octets to output"'
diff --git a/Completion/X/Command/_qiv b/Completion/X/Command/_qiv
index d10407584..35ceec09a 100644
--- a/Completion/X/Command/_qiv
+++ b/Completion/X/Command/_qiv
@@ -5,7 +5,9 @@ _arguments -s \
   '(- *)'{-v,--version}'[display version information]' \
   '--display:display:_x_display' \
   \*{-F,--file}'[read file names from file]:file:_files' \
+  '(-B --browse)'{-B,--browse}'[scan directory of file for browsing]' \
   '(-e --center)'{-e,--center}'[disable window centering]' \
+  '(-C --cycle)'{-C,--cycle}"[don't cycle after last image]" \
   '(-w --fixed_width -W --fixed_zoom)'{-w,--fixed_width}'[use window with specified width]:width' \
   '(-w --fixed_width -W --fixed_zoom)'{-W,--fixed_zoom}'[use window with specified zoom factor]:zoom (percentage)' \
   '(-x -y -z --root --root_t --root_s -f --file *)'{-x,--root}'[use image as the current desktop background, centered]:image file:_files' \
@@ -13,6 +15,7 @@ _arguments -s \
   '(-x -y -z --root --root_t --root_s -f --file *)'{-z,--root_s}'[use image as the current desktop background, stretched]:image file:_files' \
   '(-m --maxpect)'{-m,--maxpect}'[expand image to fit screen size]' \
   '(-t --scale_down)'{-t,--scale_down}'[shrink images to fit screen size]' \
+  "--trashbin[move files to user's trash bin instead of .qiv-trash when deleting]" \
   '(-b --brightness)'{-b,--brightness}'[set brightness]:brightness (-32..32)' \
   '(-c --contrast)'{-c,--contrast}'[set contrast]:contrast (-32..32)' \
   '(-g --gamma)'{-g,--gamma}'[set gamma]:gamma (-32..32)' \
@@ -21,7 +24,7 @@ _arguments -s \
   '(-i --no_statusbar -I --statusbar)'{-I,--statusbar}'[enable statusbar]' \
   '(-p --transparency)'{-p,--transparency}'[enable transparency]' \
   '(-a --do_grab)'{-a,--do_grab}'[grab the pointer in windowed mode]' \
-  '(-G --disable_grab)'{-G,--disable_grab}'[disable pointer grabbing]' \
+  '(-G --disable_grab)'{-G,--disable_grab}'[disable pointer grabbing in fullscreen mode]' \
   '(-o --bg_color)'{-o,--bg_color}'[set root background color]:color:_x_color' \
   '(-s --slide)'{-s,--slide}'[start slideshow immediately]' \
   '(-r --random)'{-r,--random}'[shuffle images for slideshow]' \
@@ -31,6 +34,17 @@ _arguments -s \
   '(-f --fullscreen)'{-f,--fullscreen}'[use fullscreen window on startup]' \
   '(-P --ignore_path_sort)'{-P,--ignore_path_sort}'[sort images by just the filename]' \
   '(-M --merged_case_sort)'{-M,--merged_case_sort}'[sort images case-insensitively]' \
-  '(-N --numeric_sort)'{-N,--numeric_sort}'[numeric image sort]' \
+  '(-K --mtime_sort)'{-K,--mtime_sort}'[sort images by their modification time]' \
+  '(-N --numeric_sort -K --mtime_sort)'{-N,--numeric_sort}'[numeric image sort]' \
+  '(-D --no_sort -N --numeric_sort -K --mtime_sort -M --merged_case_sort -P --ignore_path_sort)'{-D,--no_sort}"[don't apply any sorting to the images]" \
   '(-T --watch)'{-T,--watch}'[reload the image if it changes]' \
-  '*:image file:_files -g "*.(#i)(bmp|eim|gif|jp([eg]|eg)|pcx|png|p[pngb]m|tif(|f)|tga|x[pb]m)(-.)"'
+  '(-u --recursivedir)'{-u,--recursivedir}'[recursively include all files]' \
+  '(-L --followlinks)'{-L,--followlinks}'[follow symlinks to directories]' \
+  '(-A --select_dir)'{-A,--select_dir}'[store selected files in specified directory]:directory [.qiv-select]:_directories' \
+  '(-l --autorotate)'{-l,--autorotate}"[don't autorotate JPEGs according to EXIF rotation tag]" \
+  '(-q --rotate)'{-q,--rotate}'[rotate image]:angle:((1\:90 2\:180 3\:270))' \
+  '(-X --xineramascreen)'{-X,--xineramascreen}'[specify preferred screen]:screen' \
+  '(-Y --source_profile)'{-Y,--source_profile}'[specify colour profile file as source profile]:colour profile file:_files' \
+  '(-Z --display_profile)'{-Z,--display_profile}'[specify colour profile file as display profile]:colour profile file:_files' \
+  '--vikeys[enable movement with h/j/k/l]' \
+  '*:image file:_files -g "*.(#i)(bmp|eim|gif|ico|jp([eg]|eg)|pcx|png|p[pngb]m|pjpeg|svg|tif(|f)|wmf|x[pb]m)(-.)"'
diff --git a/Completion/Zsh/Command/_which b/Completion/Zsh/Command/_which
index c43704ae8..9b789c86b 100644
--- a/Completion/Zsh/Command/_which
+++ b/Completion/Zsh/Command/_which
@@ -1,6 +1,6 @@
 #compdef which whence where type
 
-local farg aarg cargs args state line curcontext="$curcontext" ret=1
+local farg aarg xarg cargs args state line curcontext="$curcontext" ret=1
 
 cargs=( \
   '(-v -c)-w[print command type]' \
@@ -11,6 +11,7 @@ cargs=( \
   '*:commands:->command' )
 farg='-f[output contents of functions]'
 aarg='-a[print all occurrences in path]'
+xarg='-x+[specify spaces to use for indentation in function expansion]:spaces'
 
 case ${service} in
   whence)
@@ -19,8 +20,8 @@ case ${service} in
       '(-v -w)-c[csh-like output]' \
       "${cargs[@]}" "$farg" "$aarg" && ret=0
   ;;
-  where) _arguments -C -s -A "-*" -S "${cargs[@]}" && ret=0;;
-  which) _arguments -C -s -A "-*" -S "${cargs[@]}" "$aarg" && ret=0;;
+  where) _arguments -C -s -A "-*" -S "${cargs[@]}" "$xarg" && ret=0;;
+  which) _arguments -C -s -A "-*" -S "${cargs[@]}" "$aarg" "$xarg" && ret=0;;
   type) _arguments -C -s -A "-*" -S "${cargs[@]}" "$aarg" "$farg" && ret=0;;
 esac
 
diff --git a/Completion/Zsh/Command/_zed b/Completion/Zsh/Command/_zed
index 211dae7df..6b68fadf0 100644
--- a/Completion/Zsh/Command/_zed
+++ b/Completion/Zsh/Command/_zed
@@ -5,5 +5,6 @@ case $service in
 (zed) _arguments -S : \
 	'(- 2):file:_files' \
 	'(1):shell function:_functions' \
+	'(1)-x+[specify spaces to use for indentation in function expansion]:spaces' \
 	'(1)-f[edit function]';;
 esac



Messages sorted by: Reverse Date, Date, Thread, Author